Wireless Mic Problems: Common Causes of Damage and Faults
Before you repair it, learn what causes wireless microphone problems: transmitter and receiver faults, signal loss and frequency interference.
The Shure wireless mic has become one of the standout products people are talking about. It is not just the strong audio output: the mic's body and its advanced extra features are seen as a draw of their own. Even without a cable, though, this advanced microphone is not immune to damage. Here are some of the faults that often occur in wireless microphones.
What Causes a Wireless Microphone to Fail
1. Damage to the Transmitter and Receiver
A wireless microphone depends heavily on radio signals to carry the audio signal to the audio equipment. Inside, the microphone is divided into two parts, the transmitter and the receiver. From these two parts we can see that this advanced mic uses radio channels in the UHF and VHF bands.
These two signals carry the audio on to the transmitting radio. Imagine what happens when that signal section is damaged. In that case you may hear noise, even at a low level, or no sound at all. This fault happens because the frequency connection between the transmitter and the receiver is probably damaged.
2. The Transmitter Does Not Work Properly
But do not jump to conclusions, because other things can also make a Shure wireless mic fail. For a more detailed check, look at the radio signal again. If the radio signal connects successfully, the indicator light turns on automatically. What if it does not? Most likely the microphone's transmitter is damaged and cannot work properly.
Again, do not conclude too quickly. Even after you find one reason the mic is not working as usual, it is not that easy to pinpoint the fault in such an advanced device. You need basic knowledge of the device and the help of special equipment.
The special equipment for repairing wireless microphones includes an oscilloscope and a frequency counter. These two tools help you check a wireless mic that is said to be faulty quickly and easily. They can detect faults in the transmitter and the receiver, so you know exactly where the problem lies.
3. Damage From Frequency Interference
Another common fault is a Shure wireless mic that produces no sound because of frequency interference, or because the channel on the transmitter and receiver is not set correctly. The microphone then cannot output audio as usual, but luckily this condition is not too serious, and it can still be repaired so the mic works as it did before.
Who is not annoyed to find a beloved advanced microphone damaged? There is no need to rush it to a repair shop. It is better to find out first what caused the microphone to fail. Fortunately, the wireless microphones from Goshen Swara Indonesia are made with high-quality materials, so any damage will not be too severe. Need other audio sound system products? Goshen Swara Indonesia is the solution.
